Braner 72” wide x 60,000 # Complete Slitting Line

Material Data: Cold Rolled, Coated & Hot Rolled P&O Steel; Material Quality: ASTM A568 or Better; Max Tensile Strength 100,000 PSI; Max Shear Strength 50,000 & 80,000 PSI; Strip Thickness Min .025" - Max .250"
Right to Left Operation
Coil Specifications: Entry Width 12" - 72"; Entry OD 28" - 72"; Entry ID 20" - 24"; Exit Width 28" - 72"; Exit ID 20" & 24" (with Fillers)
Operation Modes & Speeds:
Full Loop Slitting:- 0 - 1,000 FPM, Constant
Push/Pull Slitting: 0 - 1,000 FPM, Constant
Pull Through Slitting: 0 - 1,000 FPM High Gear (Base) / 0 - 333 FPM Low Gear (Base)
Slitting Capacities: 50,000 PSI Shear Strength - 9 Cuts at .250" / 27 Cuts at .025"; 80,000 PSI Shear Strength - 5 Cuts @ .250" / 17 Cuts at .025"
Travelling Coil Car #60K x 72, S/N LH-10265
Mandrel Uncoiler #60K x 72, S/N UC-10266; 25 HP Hydraulic Power Unit, Powered Hold Down Arm
Outboard Support Arm, S/N UC-10267
Entry Table, S/N ET-10268
Advanced #HET400 Thickness Gauge with Console Control
Two Head Slitter #72x2x9.5000, S/N SL-10270, Arbor Diameter 9.5"; 200 HP DC Drive
Two (2) Scrap Winders, S/N SW-10272-A & SW-10272-B
Leveler
Exit Crop Shear, S/N EU-10278
Recoiler, S/N RC-10282, Support Arm, 300 HP DC Drive, Hydraulic Push Off
Travelling Coil Car, Capacity 60,000 Lbs
Operator's Console Control
Misc Knives & Spacers