Sold

Niagara 600 Ton Straight Side Twin Bull Gear Backshaft Driven Mechanical Press

Straight Side Mechanical Stamping Presses
Manufacturer:
NIAGARA
Model:
SE2-600-108-48
Year:
1978
Stock #:
710-02195
Niagara 600 Ton Straight Side Twin Bull Gear Backshaft Driven Mechanical Press
Tonnage600 T544.311 t
Stroke12"304.8 mm
Shut Height42"1,066.8 mm
Bed area (Left to right)108"2,743.2 mm
Bed area (Front to back)48"1,219.2 mm
SPM min.15 strokes/min.15 strokes/min.
SPM max.45 strokes/min.45 strokes/min.
Adjustment16"406.4 mm
Windows Width39"990.6 mm

Model Number…………………........…....... SE2-600-108-48
Year of Manufacture………………………. 1978
Capacity.... .................................................600 Ton @ ½” off bottom
Bed Area........................................................ 108” x 48”
Slide Area…………………………………... 108” x 48”
Stroke............................................................. 12”
Adjustment.....................................................16”
Shut Height.................................................... 42” over bed
Strokes per Minute......................................... 15-45
Windows……………………………………39” wide
Footprint…………………………………… 184” LR x 103” FB
Overall Height……………………………... 24’10”
Pit Required……………………………….. 30.5” below floor
Floor To Top of Bolster…………………… 42.5”

T-Slotted Ram and Bolster
Hydraulic Tie Rod Nuts
Air Clutch and Brake
8 Point Gibbing
(4) Air Counterbalances
New Electrical Control- Basic Clutch/Brake Control- installed
Note: Press includes complete Mechanical Rebuild with all new Electrical Controls and New Updated Trabon Recirculating Lubrication System and Air System.

Loading...